Starter for 1998-2009 Buick Chevy Pontiac Olds Camaro Impala Truck 3.8L 6484 NEW

Description

Specification √ Brand new and Hight quality √ All of our starters are tested to ensure product performance and durability   Feature
√ Brand: KAC √ Voltage: 12v √ KW: 1.4 √ Condition: New √ Rotation: CW √ Starter Type: PMGR √ Teeth: 11  Application
Fitment: 1998-2009 Buick Chevy Pontiac Olds Camaro Impala Truck 3.8L
Package Includes: 1 x Starter
Fault check: The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
Your Best Online Business Partner
Starter For Buick Chevy Pontiac Olds Camaro Impala Truck 3.8L 1998-2009 6484 KAC
Specification
√ Brand new and Hight quality
√
All of our starters are tested to ensure product performance and durability
Feature
√ Brand: KAC
√
Voltage: 12v
√
KW: 1.4
√
Condition: New
√
Rotation: CW
√
Starter Type: PMGR
√
Teeth: 11
Application
Fitment: 1998-2009 Buick Chevy Pontiac Olds Camaro Impala Truck 3.8L
Package Includes:
1 x Starter
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.
Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.
Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2)
.I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3)
.What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4)
.What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5)
.If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter
Item Specifics
Brand
KAC
UPC
997750664180
MPN
GO664180
Manufacturer Part Number
GO664180
Manufacturer Warranty
5 Years
Starter Type
PMGR
Rotation
CW
Teeth
11
KW
1.4
Part Type
Starter
Number of Pieces
1
Type
Starter Motor
Voltage
12 V
OE/OEM Part Number
6484
Interchange Part Number
6484N,2-2111-DR, 2-2111-DR-2,10465525, 9000872,10465525, 12563718
Number of Teeth
11
Power Rating
1.4 kW
Payment
We accept PayPal only.
We will only ship to EBay confirmed shipping addresses.
It is buyer responsibility to provide correct shipping address before purchasing.
Buyer is responsible for any reshipping cost due to wrong or undeliverable addresses
Delivery details
We only ship this item to
United States
!
1. We ship to your eBay adress. Each package will be shipped to USA by
UPS
or
Fedex
with tracking number.
2. Please check your shipping address carefully before checkout, it can't be changed if order completed.
3. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 2 days.
4. Seriously promise: Refund or resend will be offered if item still
not arrive
in 7-10 business days. Just send us an email ,
we will give you a satisfied solution as soon as possible.
About Us
1.Not receive in time;
we will try our best to handle it well within 24hours,except International Holiday.
We will strive to providing the greatest service and bringing the highest satisfaction to all of our customers.
Contact Us
Please leave five stars positive feedback positive comment and
Five-Stars
.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,
communication Please!
(
NO
)
Three stars is LOW star, NO 1,2,3 stars PLEASE!
(
YES
)
Please give us Five-star!
Have Question or Problem??
Step 1:
Contact seller
Step 2:
Select the 1st topic:
I have a question about using my item or I want to send the seller a message
. NO others please!
Select a topic:
I have a question about using my item or I want to send the seller a message(0)(
YES
)
YES, THIS ONE!!!
We will try our best to solve online if possible, if not, will give correct return address.
I did not receive my item(2)(
NO
)
I need to return my item(1)(
NO
)
I receive an item that was not as described(1)(
NO
)
Request to cancel this order(1)(
NO
)
Step 3:
Describe your question clearly; we will give you the best solution
We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!
1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.
Return Policy
No returns or exchanges once item has been installed, used or modified.
We will exchange the item only if is defective or if customer receive the wrong parts.
Returns and/or exchanges must be done within 30 days from delivery date.
All returns and/or exchanges must be in brand new/uninstalled condition.
It is buyers responsible for any return shipping cost.
Your Best Online Business Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Hot Item
Headlights Assembly For 2003-2006 Chevrolet Silverado 1500 2500 3500 Lamp Clear
USD 68.99
Headlight Bumper Assembly for 99-02 Chevy Silverado Clear Housing Amber Corner
USD 76.99
For 2017-2018 Nissan Rogue Replace Bumper Fog Light Lamp w/Bulbs & Wiring Switch
USD 60.93
FOR 03-06 CHEVY SILVERADO AVALANCHE 1500-3500 BUMPER HEADLIGHT LAMP Smoke/AMBER
USD 66.99
72 LED RGB Car Interior Atmosphere Neon Lights Strip Music IR Remote Control 4X
USD 16.99
Excellent Delivery
New List Item
New Starter For 2002-05 Kia Sedona V6 3.5L 01-06 Hyundai Santa Fe V6 2.7L 17764
USD 54.99
Starter For GM Chevy SBC BBC High Torque 153/168 Tooth Flywheel 19695 ‎S114-823S
USD 75.99
12V Starter For 3.0L Ford Taurus 2000-2007 Mercury Sable 2000-2005 6642 SFD0041
USD 53.95
Starter 6485 For GMC Isuzu Oldsmobile Silverado Truck Blazer SDR0086 SR110862
USD 68.99
Starter 17764 For 2002-05 Kia Sedona V6 3.5L 01-06 Hyundai Santa Fe V6 2.7L KAC
USD 54.99
Starter For Buick Chevy Pontiac Olds Camaro Impala Truck 3.8L 1998-2009 6484 KAC
Specification
√ Brand new and Hight quality
√
All of our starters are tested to ensure product performance and durability
Feature
√ Brand: KAC
√
Voltage: 12v
√
KW: 1.4
√
Condition: New
√
Rotation: CW
√
Starter Type: PMGR
√
Teeth: 11
Application
Fitment: 1998-2009 Buick Chevy Pontiac Olds Camaro Impala Truck 3.8L
Package Includes:
1 x Starter
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.
Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.
Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2)
.I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3)
.What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4)
.What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5)
.If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter
Item Specifics
Brand :
KAC
UPC :
997750664180
MPN :
GO664180
Manufacturer Part Number :
GO664180
Manufacturer Warranty :
5 Years
Starter Type :
PMGR
Rotation :
CW
Teeth :
11
KW :
1.4
Part Type :
Starter
Number of Pieces :
1
Type :
Starter Motor
Voltage :
12 V
OE/OEM Part Number :
6484
Interchange Part Number :
6484N,2-2111-DR, 2-2111-DR-2,10465525, 9000872,10465525, 12563718
Number of Teeth :
11
Power Rating :
1.4 kW
Payment
We accept PayPal only.
We will only ship to EBay confirmed shipping addresses.
It is buyer responsibility to provide correct shipping address before purchasing.
Buyer is responsible for any reshipping cost due to wrong or undeliverable addresses
Delivery details
We only ship this item to
United States
!
1. We ship to your eBay adress. Each package will be shipped to USA by
UPS
or
Fedex
with tracking number.
2. Please check your shipping address carefully before checkout, it can't be changed if order completed.
3. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 2 days.
4. Seriously promise: Refund or resend will be offered if item still
not arrive
in 7-10 business days. Just send us an email ,
we will give you a satisfied solution as soon as possible.
About Us
1.Not receive in time;
we will try our best to handle it well within 24hours,except International Holiday.
We will strive to providing the greatest service and bringing the highest satisfaction to all of our customers.
Contact Us
Please leave five stars positive feedback positive comment and
Five-Stars
.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,
communication Please!
(
NO
)
Three stars is LOW star, NO 1,2,3 stars PLEASE!
(
YES
)
Please give us Five-star!
Have Question or Problem??
Step 1:
Contact seller
Step 2:
Select the 1st topic:
I have a question about using my item or I want to send the seller a message
. NO others please!
Select a topic:
I have a question about using my item or I want to send the seller a message(0)(
YES
)
YES, THIS ONE!!!
We will try our best to solve online if possible, if not, will give correct return address.
I did not receive my item(2)(
NO
)
I need to return my item(1)(
NO
)
I receive an item that was not as described(1)(
NO
)
Request to cancel this order(1)(
NO
)
Step 3:
Describe your question clearly; we will give you the best solution
We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!
1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.
Return Policy
No returns or exchanges once item has been installed, used or modified.
We will exchange the item only if is defective or if customer receive the wrong parts.
Returns and/or exchanges must be done within 30 days from delivery date.
All returns and/or exchanges must be in brand new/uninstalled condition.
It is buyers responsible for any return shipping cost.
All rights reserved.